Can Any Bathtub Be Reglazed by FG Tub and Tile?

There’s no question that bathtubs aren’t the easiest of fixtures to keep clean and free of rust or other debris. However, a good cleaning routine can go a long way toward keeping your tub looking new and in top shape for years to come. Contact us to learn more about bathtub refinishing

Bathtub refinishing is one of the most popular ways to restore a tub’s appearance, and it can be done by both professionals and do-it-yourselfers alike. But before you dive in and start refinishing your tub, it’s important to understand the process and what makes it different from other types of bathroom renovations. 

Reglazing vs. Refinishing:

When you hear the terms “reglazing” and “refinishing,” it’s easy to get confused. Both of these processes involve applying paint or glaze to the surface of a bathtub, but the difference between them is significant. 

The main distinction between the two is that reglazing involves using a coating that can last for a decade or more, while refinishing is more of an interim fix that will only last as long as you maintain it properly. 

Replacing a bathtub, on the other hand, can easily cost several thousand dollars — and requires a lot of work. For some homeowners, that may not be an option, but a professional reglazing job can save you a lot of money in the long run and leave your tub ready for another decade or more of use. 

A DIY reglazing kit costs less than $100 and can be done on most tubs. Some kits include etching powder, which you’ll need to apply to the tub’s surface before you begin. Then, you’ll have to scrub the tub with abrasive pads or sandpaper to dull it before applying the reglazing coating. 

Once the reglazing coat has been applied, it’s time to wait for the product to dry. Most products take 24 to 48 hours to dry completely, but some can take longer. You should make sure your home is ventilated during this time so that you don’t breathe in any fumes from the refinishing materials or the chemical solutions used to strip the existing finish. 

Choosing the right company to perform the reglazing is a crucial step, especially if you want the finished project to look as good as possible. Not all companies are the same, and you might have to shop around a bit to find the best deal. 

Before you get started, it’s important to clear any other surfaces in the vicinity of the tub so that they won’t get contaminated. In addition, you’ll want to remove any wallpaper and any other decor that the reglazing could impact. 

You should also make sure that your bathroom is well-ventilated during the entire refinishing process so that you don’t have to worry about any chemicals or fumes drifting into your home and potentially affecting your family’s health. 

When you’re done with the reglazing process, it’s a good idea to make sure that your tub is sealed tightly to prevent leaks in the future. In addition, you’ll want to clean your tub regularly so that the coating doesn’t wear away over time and cause the surface to look worse.