FG Bathtub Resurfacing – How Long Does It Last?
Before you decide to get your bathtub resurfaced, there are some things that you need to know about the process. This will help you understand the cost, time, and risk of premature failure of the coating. If you’re thinking about resurfacing your tub, be sure to select a reputable company. In addition, you should follow some simple tips for protecting the new coating. Contact us to learn more about bathtub refinishing san diego
Duration of FG Bathtub Resurfacing
Cost of resurfacing a bathtub
Resurfacing your bathtub can transform the look of your bathroom. Depending on the material and size, the cost of resurfacing a bathtub can be as low as $200 or as high as $1200. If the tub is made of porcelain, the procedure is more difficult and requires specialized knowledge. The process is most commonly done by a professional.
Before you start the resurfacing process, you must remove the old paint from the tub. This process can take two to five hours. The time needed for the paint to cure will depend on the finish and the type of refinishing material used. The resurfaced bathtub will last for up to 10 to 15 years.
A typical refinishing job can cost between $300 and $600. A technician will remove the old finish, sand the tub’s surface to make it smooth and even, and repair any cracks or holes. Then, a primer will be applied and multiple coats of a new finish will be applied. A refinished bathtub is ready for use in one to three days and can last for about ten to fifteen years.
Time
When repairing and resurfacing your bathtub, you need to know the proper time to let the refinished coating cure. Otherwise, the finished coating will fail prematurely. This time varies depending on the materials and coatings used in bathtub resurfacing. In some cases, it can range anywhere from 12 to 24 hours.
Bathtub resurfacing can be done in stages, and it typically takes a few hours per stage. This method is easy to work with and ensures perfect results on damaged surfaces. The process is also much cheaper than dismantling and replacing the entire product. The result is a bathtub that is more durable and attractive.
Before resurfacing your bathtub, it’s best to clean it thoroughly. A bleach and water solution can help. You can also try an abrasive cleaner, such as Comet. This will remove old caulk and make the surface of your tub rougher, which helps the coating adhere better. Once the surface is clean, sand the surface. Use a drop cloth to protect any hardware that can become damaged during the process.
Premature coating failure
If you are thinking about getting a bathtub resurfaced, you need to be aware of the signs of premature coating failure. This condition occurs when the coating does not adhere properly, and the bathtub shows the old surface underneath the new one. This type of failure can result in fading, chips, and cracks in the paint. You should also watch out for water damage.
Often, this condition is the result of improper cleaning or sanding. The coating should be smooth to the touch, and if it feels rough, you may have a problem. The coating may have been oversprayed, and it will not cure properly. To solve this, use a wet sanding solution that has a higher grit level. It is also important to make sure you use the proper mix ratio for the coating.
Another problem can occur if a heavy object drops into the tub. The impact can chip the glaze. This will allow moisture to seep into the crack and cause the tub finish to peel off.