Who Does Bathtub Refinishing? 

Bathtub refinishing, also known as bathtub resurfacing, reglazing, or re-enameling, is the process of rejuvenating the surface of a worn bathtub. This process can increase the lifespan of a tub and can also disguise structural cracks. However, it is not cheap. 

(To learn more about our miracle method bathtub refinishing process or to request an estimate, schedule an appointment with us today! Click here: https://www.fgtubandtile.com/)

Tub refinishing is a cosmetic update 

Tub refinishing is an inexpensive, effective way to refresh your tub. It helps to remove stains and rust and to restore its shiny, smooth finish. Refinishing also allows you to apply a new coat of paint, but the second coat of finish is less durable than the first and only lasts about three to five years. Regular cleaning and use of mild cleaning agents will help keep your tub in top condition for a longer period of time. 

Before beginning the refinishing process, you’ll want to take care to remove all items from the tub. Then, make sure you have a working drain and water source. Once you’ve removed everything, you’ll need to prepare the surface by cleaning it. If you’re working on a tub that has deep scratches, you can use epoxy filler to fill in those scratches. However, you should make sure to use the proper material for the type of material you have on your tub. You can scrape off excess filler with a putty knife to avoid introducing new scratches. 

It can extend the life of your tub 

A professional refinishing job will increase the life of your tub by as much as ten years. In addition to restoring the aesthetic appeal of your bathroom, refinishing will also help protect the integrity of the tub. Regular weekly cleaning is necessary to prevent unwanted agents, such as mold and moisture, from ruining the finish. 

Rusting and chipped tub surfaces are not only unsightly, but also a health risk. Rust damage can ruin the structure of a tub and result in costly repairs. In addition, if rust eats through the bathtub, water will leak out and damage the walls and floorboards. Refinishing your bathtub will give it a smoother finish and patch any rusted areas. It will also prevent rusting. With proper care, refinishing can increase the life of your tub by as much as ten or fifteen years. 

It can mask structural cracks 

While refinishing your bathtub may seem like an easy task, there are several factors that should be taken into consideration before you begin this project. First, you should remove any fixtures in the tub. This will allow you to work with the fiberglass mesh. Then, you should mix two-component epoxy filler according to the instructions on the package. Then, you can apply the mixture to the crack or hole with a putty knife. Make sure to sand off excess material. Finally, you should allow the repair to cure for a couple of hours, or longer if the crack or hole is large. After that, you can apply a finishing polish to the area to blend it into the tub. 

Refinishing a bathtub can mask a structural crack, but it cannot completely fix it. Even if it masks the cracks, they will continue to leak. This is because refinishing will cause stress to the tub, and this stress can enlarge existing cracks. Moreover, this process can also lead to the formation of web-like cracks, which are caused by the drying of the gel coat. 

It is expensive 

There are a few factors that can affect the cost of bathtub refinishing. For instance, the type of tub you have might determine how much the process will cost. Porcelain tubs are more expensive to refurbish because they need a lot of prep work. Fiberglass tubs are more affordable and require fewer preparation steps. Finally, metal tubs are easiest to refinish, but corrode easily, which may cause the coating to fail prematurely. 

Depending on your needs, bathtub refinishing can cost anywhere from $300 to $700. This estimate includes materials and labor, but will vary depending on the material and size of your tub. For instance, a large bathtub could cost upwards of $900 if it needs to be refinished professionally. 

It can take a long time 

It’s not impossible to refinish a bathtub yourself, but you should consider hiring a professional. This job can take weeks or even months, and you’ll want to make sure you’re willing to wait for it. Reglazing experts have to wait for the primer to dry completely before they begin painting. They also can’t buffer the paint while it’s wet. If you’re not up for the hassle, you could just buy a new one. 

The first step is to apply a coating of etching powder to the tub’s surface. This will make the tub look dull. You’ll have to wait several hours for the coating to cure, and you can’t use water for 24 hours. After the primer and epoxy coating have cured, you’ll need to remove any hardware.