What to Use to Clean Marble Countertops?
You need to use a pH-neutral, non-abrasive soap when cleaning marble. Regular dish soap is suitable, and it can be mixed with warm water in a spray bottle. Spray the soap on the marble with a clean cloth and wipe it off. Then, rinse and dry it. Do not use too much soap because it may leave a film on the marble.
(For services like ceramic floor tile refinishing. Contact us today!)
Baking soda
Baking soda is a very inexpensive and effective cleaning solution for marble countertops. It works by removing stains and grime, and is light-abrasive. However, it should be used with caution, as it can cause damage to delicate surfaces. You should always rinse the counters thoroughly after using baking soda, and dry them thoroughly with a soft cloth.
A paste made from baking soda and water should be applied liberally to marble countertops. You can also use a cleaning brush or additional cleaner if the stain is particularly stubborn. After 24 hours, wipe off the paste with soapy water.
White vinegar
If you want to clean marble countertops but don’t know how to get rid of stubborn stains, you can use white vinegar to clean them. You should use this cleaning solution to apply a gentle scrub motion to the surface. If the grime persists, add more cleaner or use a scrub brush. Finally, wipe off the surface with a dry cloth.
White vinegar is a powerful acid that can be used to clean marble. However, it should be used carefully, as it can damage the material. The acidity of white vinegar can cause the stone to dull. Use a soft, lint-free cloth to wipe it off afterward, and then use a dry chamois to buff the surface to a high shine.
Non-abrasive soap
Marble countertops are porous and should be cleaned with non-abrasive soap to keep them looking clean. While most marble is safe for daily use, it can absorb certain ingredients, such as toothpaste, leaving behind residue. It’s important to act quickly to remove stubborn stains. For organic stains, apply a solution of 12% hydrogen peroxide mixed with ammonia, and for oil-based stains, apply a liquid cleanser with acetone or mineral spirits.
The next step in caring for your marble countertops is to make sure you use the right equipment. Traditionally, you’ll have to use a sponge, but there are also specialized cleaning cloths. These are gentler than sponges, and they won’t leave water spots or lint on the marble. Microfiber cloths also tend to hold up better to frequent use.
Bleach-based cleaners
Using bleach-based cleaners to clean marble countertops may not be a good idea. Marble is a porous stone and is prone to stains. Water, oil, and food stains can all leave marks on marble counters. To remove these stains, use a peroxide or ammonia solution. To remove minor scratches, you can rub the counter with a steel wool pad.
Before using any cleaning solutions, make sure you test them on an inconspicuous part of the surface to ensure that they will not harm the stone. Do not mix any acids with other cleaning products because the mixture could be toxic and potentially harmful. Moreover, oil-based stains cannot be removed with natural methods and must be treated chemically. For this, you can use a solution of one half cup of ammonia to one gallon of water. However, it is important to note that frequent use of ammonia solution can dull the stone surface.