What is the Difference Between Bathtub Refinishing and Reglazing?
Before deciding on a bathtub refinishing project, you should know what to expect. The process consists of cleaning your bathtub, applying four layers of the polyurethane finish coat, and sanding in between. The entire process takes from four to six hours and is performed by a single technician. Once the refinishing process is completed, the tub should cure for 24 hours before using it.
(To learn more about our miracle method bathtub refinishing process or to request an estimate, schedule an appointment with us today! Click here: https://www.fgtubandtile.com/)
Cost of bathtub refinishing
Refinishing and reglazing a bathtub can be costly. The cost depends on the type of bathtub and its size. Freestanding tubs require more work because they have deeper walls and a large surface area. Moreover, freestanding tubs may require exterior refinishing as well.
If you want to save money on bathtub refinishing, it is a good idea to hire a professional. Although bathtub refinishing and reglazing may seem easy and inexpensive, this process involves a lot of techniques and materials. It is best to hire a professional to ensure a good result. Depending on the materials used, bathtub refinishing and reglazing can cost anywhere from $480 to $630. Nevertheless, the overall cost is cheaper than bathtub replacement.
The time it takes to refinish a bathtub
When you decide to refinish your bathtub, there are a few steps you need to take to make sure that the finished product looks as good as possible. The first step is to apply a primer to the surface of the bathtub. Allow the primer to dry before applying multiple layers of refinishing coating. Once the primer and the refinishing coating are in place, you should let the bathtub set for two to four days before you use it again. Once the coating is fully set, you should seal the bathtub with a sealing coat.
You can also choose to refinish the tub yourself by purchasing a kit from a local home improvement store. These kits usually cost $30 to forty dollars, and you can complete the process in about three to four hours. The length of time will depend on the type of solution you choose and the state of your bathtub.
Exposure to harmful fumes
The process of bathtub refinishing and reglazing can pose a risk to your health. Chemicals such as methylene chloride, which is used in degreasing and paint removal, are released during the process. These fumes are heavier than air and can cause respiratory problems. Exposure to these fumes is particularly dangerous for those who do not wear proper respiration equipment.
Exposure to these fumes during bathtub refinishing is not limited to the job site, but it’s a concern for workers as well. Methylene chloride is a known carcinogen, and exposure to it can kill a worker. However, some refinishing agents are not dangerous to humans, which means you can do the job yourself without the need for a professional.
Efficacy of reglazing a bathtub
Though bathtub reglazing is a relatively easy process, the process can be intimidating for first-time homeowners. However, once you’ve had it done properly, the results will last for as long as 10 to 15 years. It can also be done yourself at home if you know what you’re doing.
The process of reglazing a bathtub involves cleaning the tub of all foreign materials and then applying a stronger coat of finishing paint. If done incorrectly, this process can result in uneven areas and poor adhesion. This can lead to a reduced lifespan for the paint.