How to Avoid Porcelain Tile Chipping When Cut?

If you’re looking to tile your home, you probably have a few questions about how to cut porcelain tiles and make sure you don’t chip them. Tile is a dense and heavy material that can be difficult to cut and can cause damage if not done properly. However, there are several tips and tricks you can use to avoid chipping. 

(Searching in Google “Paint Ceramic Tile Floor“? Contact us today!)

First and foremost, always read the instructions. This is especially true when it comes to using a wet saw, as improper technique can cause damage to the tiles you’re trying to cut. To start, make sure you have a full water reservoir. You’ll also want to wear a mask to protect yourself from dust and water droplets. 

Another tip is to take advantage of the features of your wet saw to your advantage. For example, some of these models have a leveler that can help you align the tiles you’re cutting with the blade. Using a leveler will help you make clean cuts and won’t chip the surface of your tile. 

A tile nipper is the best way to mark your cutting line, but it’s not the only tool you’ll need to cut your tiles. Other tools include a handheld rotary tool, a power saw and an angle grinder. Use a sharp blade and keep a steady hand. 

While you’re at it, don’t forget to use some masking tape to help prevent chips. Tape can also keep the tile from getting smashed between the guide and the cutter, which can lead to worse chipping. 

The old carpenter’s trick for cutting tiles can still work. One trick is to use scrap pieces of tile in place of the actual ones. They can be placed in a tray before the actual tile. This allows you to see where your cutting lines are and prevents you from accidentally making a deep cut. 

There are plenty of wet saws on the market, but you should do your research before choosing one. Some of these models lack a proper depth setting feature. Depending on the size of your project, you may need to adjust the depth of the cut. Regardless of the type of wet saw you choose, make sure to check the quality of the blade. Also, make sure to clean the blade and sharpen it often to ensure a long life. 

The old carpenter’s tip for cutting tiles is not to cut them too closely. Leaving a few millimeters between each tile can prevent chipping. Similarly, making shallow cuts isn’t a bad idea. Notching your tile is also an effective way to improve your chances of success. 

The wet saw is an excellent way to cut porcelain tiles, but it’s not a foolproof method. You’ll need to follow the manufacturer’s instructions and be careful not to overheat the tile. In addition, using a wet saw can chip the tile’s surface. Using the best tool for the job can make the difference between success and failure.