How to Unclog a Bathtub?

Unclogging a bathtub is a simple task if you follow the right instructions. There are a few tools and tricks you can use to clear your tub of clogs. A plunger is one of the most basic bathroom items. It is designed to force a clog out of your bathtub by adding pressure. The plunger has a rubber lip that should be in contact with the surface of your bathtub, all the way around. 

(Looking for bathtub sink tub and tile refinishing? Contact us today!)

You can also get creative. One of the most effective methods of clearing a bathtub is the baking soda and vinegar combo. Putting a mixture of boiling water and vinegar in the drain will dislodge any scum and hair that has accumulated there. This method can be done in stages if needed. However, it is best to leave the mix for at least 5 minutes. 

Another option is to clean out the tub’s drains using a snake. Plumber’s snakes can be purchased from hardware stores. Before you begin, you should make sure the snake is in good working condition. After using it, you will want to store it for future clog busting duties. 

For more advanced clog-busters, you can buy a long, flexible pipe-cleaning device. Online stores usually have these devices. Although they may seem a little more complicated to use than the average bath toy, they can help unclog a bathtub in a pinch. 

A wire coat hanger can also be used to fish out clogs. However, you will want to be careful not to damage the pipes. If the clog is small, a simple bend should be enough to break it loose. To avoid bending the wire, you might consider buying a thinner version. 

Another great alternative to the plunger is to use a wire coat hanger bent into a hook. This method will allow you to nab the more stubborn obstructions that your plumber’s snake might miss. However, you’ll probably have to repeat the process several times before it works. 

As with all tasks, you’ll have to wear protective gloves. Once you’ve plucked the clog out, replace the overflow cover plate. Lastly, be sure to wipe any residue off the snaky snake. 

If all else fails, it might be time to call a professional. Your clog might be caused by an invasive root that requires more than just a plunger. While the best solution is to remove the clog after plunging, the least expensive and easiest option is to have a plumber do the job. Unless you’re handy with tools, this might be the better choice. 

If you don’t have a plunger, you can try fishing out a clog by throwing some hot water in your bathtub. Just be sure to test the drain to be sure you’ve gotten all of the scum out. 

A clogged tub is no fun. In fact, a clogged bathroom can be an embarrassing sight. That’s why you need to know how to unclog a bathtub, even if you have to do it yourself.