How to Seal Porcelain Tile Floors?
When a homeowner purchases porcelain tile, they’re buying a long-lasting, beautiful and durable material. However, before you can install it, you’ll need to know how to seal it properly. This will protect it from staining, wear and tear, and moisture. There are several options for sealing your porcelain tile.
(Searching in Google “Bathroom Tile Countertops“? Contact us today!)
The first step is to decide which type of sealant you’ll need. The best option is to use a penetrating sealant. Penetrating sealants fill in the small gaps in porous tiles. In addition, this will also prevent them from absorbing liquid.
Next, you’ll need to pick up a suitable brush or sponge. If you’re using a sponge, make sure to remove all lint and dust. Use a sponge with a shallow container so it’s easier to apply the sealant evenly. A foam brush is also a good choice, but you should be careful not to get the sealant on the tiles.
You should also be careful to follow the manufacturer’s instructions. Some manufacturers recommend applying the sealant in a well-lit room. To speed up the process, you could also place a fan over the area. It may take some time for the sealer to cure. So, if you’re concerned about a sticky surface, you might want to wait a few hours.
Another thing to remember is that you’ll need to be sure the tile is completely dry before you start the process. Otherwise, the sealant won’t work.
Using a high-gloss sealant can improve the look of your floor and increase the protection it provides. However, some high-gloss products can peel off after a few weeks. Alternatively, you could choose a water-based sealant. This option is much safer.
Once you’ve chosen a sealant, you should make sure it’s the right size for your application. You should never apply more than a third of your entire tile floor at once. Applying too much will create a sticky surface.
You should also use the proper tools. A soft cloth and a mop should be on hand. Using a sponge or a commercial cleaner is a good idea, but you should avoid using metal wire brushes. Steel wool is another material that you shouldn’t use to clean your porcelain tile.
If you’re not sure what kind of porcelain or stone you have, you should do a water test. If your tile doesn’t soak up the water, it might not need to be sealed. Similarly, if you have a hard knock, you’ll probably want to seal it.
Although you should be careful about how you do it, the process is fairly straightforward. For the most part, you’ll only need to follow a few simple steps to ensure your tile is protected and looks great. All you’ll need to do is think about the sealant you’re going to use, be cautious about how you apply it, and be sure to check the specifications of the product you’re purchasing.
The water-resistant barrier is the most effective way to prevent moisture from damaging your tile. You can apply the barrier in the shower or bathroom, and you might even be able to use it to seal your grout.