How to Repair Cracked Ceramic Tile?

Cracked ceramic tile can be caused by many things, including incorrect installation, heavy objects dropped on it, or extreme temperature changes. However, the good news is that it is relatively easy to repair a small crack. 

(Searching in Google “tile refinisher company“? Contact us today!)

To start, you can remove the broken tile with a hammer or a chisel. You should always wear gloves and a dust sheet. If you want to save time, you can use a notched trowel to apply the adhesive. 

The process of repairing a crack in a tile may seem daunting. But, with the right tools and a little elbow grease, you can achieve results that are almost as good as new. 

The best way to do this is with a two-part epoxy kit. These kits are very affordable. They come with a specific applicator tool, so you can get the job done quickly. The resin should be mixed before you apply it. This will give you a stronger result. 

Once you have your filler mix, you can add a little paint to make the job look like it was never there in the first place. It is also a good idea to apply a sealer to the repaired area to keep water from entering the crack. If you are planning to walk on your ceramic floor after you have repaired the crack, you should wait at least 24 hours to make sure the glue has dried. 

Aside from the epoxy, you can also use a popsicle stick to fill smaller hairline cracks. You can even use a thin craft paintbrush to do it. Another option is to paint over the cracked tile with waterproof paint. This is especially useful for small cracks that are close to the surface. 

You can also paint over a crack with nail polish. This will help to disguise a small chip, but it won’t do much for a large one. You can use regular paint or oil-based paint to cover a larger crack. You should paint in the same color as the tiles, and you should match the paint to the color of the surrounding grout. You can also try covering the broken tile with a coat of urethane to help the paint hold up. 

The biggest mistake you can make in repairing a ceramic tile is using superglue. This is not the best choice because it can break, and it is more susceptible to heat. It can be very tricky to remove the glue if it has become thick. You can get around this by using a vacuum to take the excess water out of the crack. 

You can also buy a 2-part epoxy kit and apply it on the spot. These are great for repairing larger cracks. A small bottle will cost about $5-20. The most important thing to remember is to follow the manufacturer’s instructions. You should leave the epoxy to cure for about an hour. 

The other best way to repair a crack in a tile is to replace it. Depending on the size of the chip, you may need to buy extra tiles, but it is usually a better option than replacing the entire floor. You can find spare tiles in your basement or shed.