How to Reglaze Your Kitchen Sink? 

If you want to learn how to reglaze your kitchen sink, it is important to prepare the surface properly. Depending on the material of the sink, you will need different cleaning materials. You can use an acid paste to remove unwanted materials such as silicone caulk. Alternatively, you can use a silicone digester.

(Looking for a tub resurfacing service? Visit or contact us today!)

Cost of refinishing a kitchen sink 

You may be wondering about the cost of refinishing a kitchen sink. This procedure restores a sink’s shiny, spotless appearance. The process is easy and can be completed within a few days. The process involves several steps, including washing the sink thoroughly. Next, you will sand the surface. 

Refinishing a porcelain sink can be a good idea, as it is more cost-effective than replacing it. This process will restore the sink’s surface, and you can change its color or design to suit the room. Many homeowners choose to tackle the task themselves, but many people hire a professional to avoid the risks. 

Steps to refinishing a bathroom sink 

If your bathroom sink has lost its shine and has cracked surfaces, you may want to consider refinishing it. Refinishing can be a cost-effective alternative to replacement and may save you 80% or more over the replacement cost. The refinishing process involves applying a new layer of finishing to the sink and sanding it down to resemble the original finish. 

The first step is applying an epoxy filler to the damaged areas. Apply it with a plastic putty knife, and then allow it to dry for the recommended time. Once dry, smooth it out with a fine-grit sanding pad. After sanding, apply a degreasing solution, rinse the sink, and dry it thoroughly with a clean lint-free cloth. Masking paper helps protect counter surfaces, as well as faucet fixtures. If you are repairing a backsplash, place masking paper there as well. 

Choosing a refinishing product 

Choosing a refinishing product is a big step in the process of reglazing your kitchen sink. If you’re not a professional refinisher, it is important to choose a product that will prevent brush marks and will be safe to use around water. Also, you should choose a product that is durable and won’t chip. The process requires a little bit of prep work and time for the coat to dry completely. During this time, you should make sure to wear a mask to protect yourself from the chemicals. 

The first step in refinishing a kitchen sink involves sanding the surface. You can get a prep kit that contains an abrasive paste and a sanding pad to make the surface smooth. You should rinse the surface thoroughly after using this product. Once you’re done sanding, you can clean the sink with a TSP solution. While TSP isn’t the most eco-friendly solution, it is powerful and will remove dirt and other stains. Next, you should let your sink dry before applying the next step. 


Whether you want a refinished look for your kitchen sink or you just want a fresh look for your entire home, it’s important to prepare the area well before you start work. First, protect any nearby surfaces. This includes floors, walls, plumbing, and even fixtures. Also, protect the drain with masking tape, which will prevent dirt and debris from clogging the drain pipe. 

Ensure that the area is clean and dry before starting the reglazing process. The sink should be dry before applying primer. Apply the primer to the surface using a spray epoxy primer or a paintbrush. Next, sand the interior of the sink using fine sandpaper. Wipe away any dust with a lint-free cloth. Let the primer dry for at least an hour. 


There are many ways to save money on a kitchen sink reglazing project. One way is to do it yourself. This task can be done on sinks that are acrylic, porcelain, or steel. However, you should be aware of the risks involved. You should also consult a professional before tackling this project. 

There are many DIY sink reglazing kits available at hardware stores. However, these do not work as well as the professional service. They will leave brush marks in the coating and may not last as long as a professional job. Also, they will take a lot of time to set, increasing the risk of debris or other items getting into the coating.