Paint Granite Countertops to Look Like Marble 

Whether you are looking to change the look of your kitchen or you just want a more beautiful counter, you can use paint to create a countertop that looks just like marble. But before you begin, you need to ensure the counter is clean and free of built-up grime. You will also need a high-quality primer and sealer. You may also need to sand the surface to ensure that it is smooth and even. 

(Searching in Google “refinisher tubs and tiles“? Contact us today!)

To paint granite countertops, you will need a brush or sponge to apply the paint to the surface. Ideally, you should use a natural bristle brush to finish the final coat. However, if you do not have one, you can use a foam brush. This will allow you to blend in the corners and edges. 

If you have a laminate counter, you will need to sand the surface down. This is especially important if the countertop is near a stove or sink. You should also avoid using cleaners that contain ammonia, as these will make the finish too tacky. You will also need a paint scraper to remove drips. 

Once you are finished painting, you can seal the counter with an oil-based polyurethane. You can buy these at your local hardware store or craft store. You will need to read the instructions on the container carefully to make sure you are applying the right amount of paint. You should wait at least three days before using the countertop. 

After the countertop has dried, you can start the veining process. You will need to smudge the paint in certain areas to mimic the veins of marble. Using a sea sponge or a paintbrush will help you soften the lines. You can also try dipping your finger into the glaze and flicking it over the countertop. This will create a more realistic look. 

Next, you will need to fill in the remaining imperfections. You can do this with a small artist’s paintbrush or a feather. If you are not used to painting, you might not get the paint to be even. This can cause unwanted bubbles. You can also use a paint roller to paint the edges of the counter. 

You can add metal flakes to the paint to give the countertop a more realistic look. These can be purchased at a craft store or online. They will cost around $10. This will add depth and shine to the countertop. You can also use acrylic paint dots to replicate the veins. 

Depending on the type of countertops you have, you might need to etch the surface. If you choose to etch the surface, you should be prepared to wear protective glasses. Some people also prefer to use a Brillo pad to clean the countertop. This will also protect the surface from heat and chemicals. If you decide to sand down the imperfections, you should use a 600-grit sandpaper. 

After the countertop is dry, you can apply a second layer of paint. You can use a small roller to cover the countertop in a thin layer. You can also add metal flakes to add dimension. This will keep the color looking more natural and will protect the surface from scratches.