How to Measure Countertop Square Feet?
When estimating the square footage of a countertop, it is important to know the dimensions of both the countertop and the room in which it will be placed. The L or G shape of a kitchen can make the measurement process more complex, as you must know the length of both surfaces closest to the walls and the way in which the two surfaces will intersect at the corners. If you are installing a countertop made from stone, you will also need to know how the stone slabs will be connected at the corners. There are two basic ways to do this.
(For bathtub resurfacing bathtub refinishing cost, contact us today for a quotation!)
Using a measuring device
Using a measuring device to measure countertop size is an important step in the design process. It can help you calculate how many square feet a countertop will take and help you draw a layout diagram. This information is useful for communicating design changes with your countertop supplier. You can use a pen and paper to take measurements or use a smartphone camera.
First, you should know how to measure the countertop’s length and width. These measurements should be in inches. Then, multiply these measurements by 144 to get the total square footage. You can also multiply the total square footage with the retail price per square foot of the countertop to determine how much material you will need.
Sketching the room before measuring countertops
When planning for new countertops, it’s helpful to sketch a rough layout of the room, not only to give potential contractors a visual of the area, but also as a reference for measuring. Make sure to sketch the dimensions of walls and doorways, and mark the location of appliances, sinks, faucets, and fixtures.
Once you’ve sketched the room, the next step is to measure countertops. This is especially helpful if you’re remodeling a kitchen. By doing so, you’ll know how many pieces of countertop material you’ll need. Measurements of rectangles and squares are easier to make than measurements for irregular shapes. Also, measure the length and width of the lateral surfaces – the sides and edges of the countertop.
Calculating counter-depth
When measuring the width and length of your countertop, you should use a piece of graph paper and label each rectangle with a letter. This will help you communicate the layout of your counter to your countertop supplier. It is also important to write down the measurements in fractions, such as 1/4, 1/2, and 3/4, as these will be converted to decimals when you calculate the final square footage of your countertop.
Countertop installers will do the measuring professionally for you, but it is also possible to do the job yourself. To avoid errors, gather the materials you need and have extra pencils and paper available. Also, gather the necessary tools. This way, you can do the measurements yourself without any assistance.
Including a sink in the measurement
Including a sink in the countertop square-foots measurement is an important step in the design process. Sinks are integral parts of many kitchens, and they will require different measurements. In addition to the measurements for the countertop itself, it is also necessary to consider the sink’s depth and any cutouts.
Most countertops are square or rectangular, but some may not be square or rectangular. Corner sinks, ledges, or other shapes cannot be measured the same way. The center part should be measured as a square, while curves and right angles will have to be measured by extending an imaginary line across the face of the sink area. Otherwise, the extra space becomes wasted material.