How to Install Outdoor Porcelain Tile?

If you’re looking to improve the look of your outdoor living area, consider installing porcelain tiles. They’re lightweight, durable, and easy to clean. Plus, they’re resistant to staining. And they have a great look that can go from classic to modern. 

(Searching in Google “Removing Ceramic Floor Tile“? Contact us today!)

Before you start, be sure to take the necessary steps to prepare your landscape for installation. This includes leveling the surface. You may also need to dig out an area or add a sub-base. 

Once the surface is prepared, you can begin laying the tiles. It’s important to use spacers for proper spacing. Also, you should be careful not to walk on the tiles for a few hours while the adhesive sets. 

Once the tiles are in place, you’ll need to apply a grout. Grout is available in a variety of colors. Be sure to check the manufacturer’s instructions for the best results. A pointing trowel is ideal for firming the grout into the tile. 

After the grout has set, you can lay the first tile. This is the most important step in the process. Place the first tile in a corner. Then, continue placing the other tiles around the perimeter. 

For porcelain tiles, it’s recommended that you install the product on pedestals. But you can also choose to do it on concrete. In some cases, you will need to create a small slope for drainage. 

As a general rule of thumb, outdoor porcelain is about 18-22mm thick. You can find tiles that are slightly thicker than that. However, make sure you get a grade that’s appropriate for your needs. 

Regardless of what type of tile you’re using, the final look of your landscape depends on how you plan to use it. You can choose a classic look, such as black and grey, or you can experiment with a variety of color schemes and patterns. There are options for outdoor porcelain tiles that are waterproof, as well. 

If you’re installing outdoor porcelain tiles, you’ll need a pair of good tools. First, you’ll need a water-fed cutter that has a diamond blade. Secondly, you’ll need safety shoes and gloves. Finally, you’ll need a separate set of spacers. 

Depending on your budget and needs, you can also opt for a built-in edge restraint. These are generally used on concrete, but you can customize a system for your own needs. 

Before you start, you’ll want to block off a few days to give yourself a chance to get everything in order. Additionally, you’ll want to have a second set of hands to help you finish the job. Having two people can make the whole installation process easier and less stressful. 

Lastly, you’ll need to protect your porcelain tiles from rain and extreme weather. Keep in mind that it will take a few days for the adhesive to fully dry. You can keep the tiles dry by protecting them with a light household cleaner. 

Whether you’re putting in new landscaping to increase your curb appeal or you’re creating a patio for the kids, porcelain is a great way to improve the look of your outdoor living area. And it can save you a lot of labor costs.