How to Install Marble Countertops in Kitchens?

Marble countertops are a great way to add character to your kitchen. They are durable and are also heat resistant, making them an ideal work surface. To install a marble countertop, you will first need to remove your existing countertops and cabinets. 

(Looking for countertop resurfacing? Contact us today!)

Then, you will need to mark out your sink hole. This is important because you need to ensure that the tile is sized appropriately. You can use a template to help with this. A plywood template is one way to do this. You can also use a wet saw to get the job done. You can do this yourself, or you can hire a professional. The blade used should be no smaller than a 7″ blade. 

For the most part, installing a marble countertop is a simple process. There are some special steps involved, however. It is not recommended that you attempt the task without proper guidance. This is why most experts recommend that you engage the services of a contractor. The technician will be able to ensure your satisfaction, ensuring that you end up with a perfect marble countertop. 

First, you will need to measure the exact square footage of your kitchen. This is essential in order to create a countertop that will fit your space. You will need to choose a material based on color, veining, and sheen. If you are unsure about which material to choose, you can do some research online. 

The next step is to take a look at your old countertop. This is especially important if you are replacing your kitchen counters with marble. The stone can stain, so you will need to clean it with a bleach solution or alcohol. To prevent damage, you can use water softeners to minimize the effects. 

You will need to make sure that your countertops are level. To do this, you can use shims or ladder supports between the wall and the outer two x fours. If you have uneven cabinets, you may need to sand your counter tops a bit before installation. This will keep the counter from moving around and cause problems. 

For a smoother finish, you can use thinset mortar. You can spread this on your countertop and then use a notched trowel to create a thin, even layer. You will need a small amount of grout to go along with this. The thickness of the grout should be about one millimeter. This is not enough to allow the tiles to be lifted up and out of position, but will help to reinforce the bond. 

The best way to do this is to put a small amount of thinset on the back of your edge tiles. This will provide a nice level surface for the marble. If you are worried about the adhesive sticking to the counter, you can use a float to get it in place. You can also use tape to hold the tiles in place. 

The best way to show off your new marble countertop is by showcasing the little things. Whether you are doing a full renovation or simply replacing your countertops, you need to pay attention to the details. A simple trick to preserving your countertop’s longevity is to seal it every two years.