How to Cut Laminate Countertops?

Laminate countertops are a great DIY project. They are made from thin layers of paper that are bonded together with a resin. It is easy to install, and you can choose the shape and size of your countertop. There are many different ways to cut laminate, including with a table saw, a handsaw, a jigsaw, and a router. But you need to use the right tools, and know how to use them correctly. 

(Searching in Google “FG Tub and Ceramic Tile“? Contact us today!)

For the best results, a slick blade with a fine tooth count is a must. You can also use a carbide-tipped blade to help reduce the likelihood of chipping. Depending on the size of your project, a 40-tooth per inch or 80-tooth per inch blade is appropriate. The fine-toothed blade is more durable, so it will last longer. 

A good circular saw with a fine-toothed blade will help you cut through your laminate without chipping. However, be sure to set it to the correct height for a through cut. In addition to the proper blade, you need a fine-grit carbide belt to keep the cutting smooth. Also, don’t forget to wear safety gear. 

One of the easiest methods for cutting laminate is by using a table saw. If you don’t have a table saw, a jigsaw may be a better choice. Jigsaws are ideal for curved cuts. Keep in mind that you will need to work slowly when cutting. Make several shallow passes, or the edges may start to chip. 

When you’re ready to get started, measure your countertop, and mark out the width and length of your cut lines. This is the most important step, because you’ll want to make each cut in order. Once you’ve finished, you’ll need to add a backing board to protect your surface. You can use contact cement to secure the material to the board. 

Use a measuring tape to make sure that your markings are accurate. Another helpful trick is to use a pencil to draw the line on the laminate, which will ensure that you’re using the right tool to cut out the appropriate shapes. While you’re at it, put some masking tape on the top and bottom of the counter to prevent chipping. 

Although a jigsaw is not a requirement, it can be helpful for large curves and holes. Make sure to wear safety gear, and don’t attempt to do your own cutting. 

While you’re at it, be sure to measure the underside of your countertop to avoid having to re-cut it later. You may need to sand and polish it, or use a router to make it perfectly straight. 

Using a circular saw or a jigsaw is the most common method to cut a laminate countertop, but there are other options. These include a hand saw, a Japanese pull saw, and a reciprocating saw. Just be sure to wear protective gear, like eye and mouth guards, while operating these power tools. 

Finally, if you’re lucky, you’ll get a nice finish on your laminate countertop. Generally, you should get a finished product that matches the quality of your original laminate.