How to Apply Rust Oleum Tub and Tile Refinishing Kit to Shower Tiles? 

The rust oleum tub and tile refinishing kit is a good choice to spruce up your bathroom without breaking the bank. It’s an easy and fun project that can be done in no time – and the results are pretty impressive! 

(Looking for best cleaner countertops? Contact us today!)

The best part is that you can complete this project in a weekend or less. The only downside is that you need to take into account your weather conditions, your availability, and the timing of each step. 

You’ll also want to be sure you have enough supplies to get the job done. This includes the refinishing paint, caulk remover, and of course a sander. 

Make sure you read the package instructions and follow them closely. You’ll want to mix parts A and B of the refinishing kit for about two minutes each to ensure you’re getting the proper consistency for a smooth application. 

There’s a ton of information on the internet about this project so it’s important to know what you’re doing before you start. A reputable source will have all the details, including the best paint to use, the most effective primer, and a handy step-by-step guide to getting you started. 

First, you’ll need to clean the tub and tiles. If you don’t, you can end up with a streaky mess and a smeared finish when the paint dries. You’ll also want to make sure you are using the right type of cleaner and that you are getting the best quality sandpaper. 

Next, you’ll need to sand the tub and tiles in order to get the best possible surface for the refinishing process. This can be done using either wet or dry sandpaper, and it’s really a matter of personal preference. 

The best thing about this refinishing kit is that it reaches across the board. It can be used on porcelain, fiberglass, ceramic, and acrylic, so you’ll be able to spruce up the shower in no time.